The message "Connecting to
Anynet+ device..." appears on
The Anynet+ device does not
The connected device is not
6.11 DivX® Video On Demand
Shows the registration code authorized for the product. If you connect to the DivX web site and register
using that code, you can download the VOD registration file.
For more information about DivX® VOD, visit "http://vod.divx.com".
You cannot use the remote control when you are configuring
Anynet+ or switching to a view mode.
Use the remote control after the product has completed Anynet+
configuration or has finished switching to Anynet+.
You cannot use the play function when
is in progress.
Check whether or not the device supports Anynet+ functions.
Check whether or not the HDMI cable is properly connected.
Search Anynet+ devices again.
Anynet+ requires an HDMI connection. Make sure the device is
connected to your product with an HDMI cable.
Some HDMI cables may not support Anynet+ functions.
If the connection is terminated because there has been a power
failure or the HDMI cable has been disconnected, please repeat
the device scan.
DivX® Video On Demand
Plug & Play
is set to
in the Anynet+