Manually Add Your New Network Connection - Samsung GALAXY S4 User Manual

Connect to a Wi-Fi Network
1. From the Home screen, tap
Connections Wi-Fi.
The network names and security settings (Open
network or Secured with WEP) of detected Wi-Fi
networks are displayed in the Wi-Fi networks section.
2. Tap the network you want to connect to.
Note: When you select an open network, you will be
automatically connected to the network.
3. Enter a wireless password if necessary.

Manually add your new network connection

1. From the Home screen, tap
Connections Wi-Fi.
2. Tap Add Wi-Fi network.
3. Enter the Network SSID. This is the name of your
Wireless Access Point.
4. Tap the Security field and select a security option. This
must match the current security setting on your target
WAP.
Settings
Note: The next time your device connects to a previously
Turning Wi-Fi Off
Settings
Note: Use of wireless data connections such as Wi-Fi and
5. If secured, you will also need to enter your WAP's
password.
6. Tap Show advanced options, if you need to add
advanced options such as Proxy settings, IP settings,
or Key management.
7. Tap Connect to store the new information and connect
to your target WAP.
accessed or secured wireless network, you are not
prompted to enter the WAP key again, unless you reset
your device back to its factory default settings.
1. From the Home screen, tap
Connections Wi-Fi.
2. Tap the ON/OFF slider, located to the right of the Wi-Fi
field, to turn Wi-Fi OFF
Bluetooth can cause an added drain to your battery and
reduce your use times.
Settings
.
Connections 170