Manually Add A New Network Connection - Samsung Galaxy Note II User Manual

3. Enter a wireless password (if necessary).
4. Tap Connect.
Wi-Fi Status Indicators
The following icons indicate the Wi-Fi connection status:
Displays when Wi-Fi is connected, active, and
communicating with a Wireless Access Point
(WAP).
Displays when Wi-Fi is active and there is an
available open wireless network.
Displays when Wi-Fi Direct is active and
configured for a direct connection to another
compatible device in the same direct
communication mode.
Displays when Wi-Fi Direct is active and
communicating
Displays when Wi-Fi is being used as a Mobile
HotSpot feature is active and communicating.
For more information, refer to "Wi-Fi Direct Setup
and Settings" on page 276.
268

Manually Add a New Network Connection

1. From the Wi-Fi network screen, tap Add Wi-Fi network.
2. Enter the Network SSID (the name of your Wireless
Access Point).
3. Tap the Security field and select a security option. This
must match the current security setting on your target
WAP.
4. Enter your WAP's password if the WAP is secure.
5. Tap Save to store the new information and connect to
the target WAP.
Note: No prompt to enter the WAP key displays if this is the
second time to connect to a previously accessed or
secured wireless network. The WAP key is required
when the device is reset using factory default settings.