Manually Add Your New Network Connection - Samsung Galaxy S5 Active User Manual

Manually add your new network connection

1. From any Home screen, tap
Wi-Fi.
2. Tap Add Wi-Fi network.
3. Enter the Network SSID. This is the name of your
Wireless Access Point.
4. Tap the Security field and select a security option. This
must match the current security setting on your target
WAP.
5. If secured, you will also need to enter your WAP's
password.
6. Tap Show advanced options, if you need to add
advanced options such as Proxy settings and IP
settings.
7. Tap Connect to store the new information and connect to
your target WAP.
Note: The next time your device connects to a previously
accessed or secured wireless network, you are not
prompted to enter the WAP key again, unless you reset
your device back to its factory default settings.
➔ Settings ➔
Turning Wi-Fi Off
1. From any Home screen, tap
Wi-Fi.
2. Tap the ON/OFF slider, located to the right of the Wi-Fi
field, to turn Wi-Fi OFF
Note: Use of wireless data connections such as Wi-Fi and
Bluetooth can cause an added drain to your battery and
reduce your use times.
Manually Scan for a Wi-Fi Network
1. From any Home screen, tap
Wi-Fi.
2. Tap ➔ Scan.
All available Wi-Fi networks are displayed.
➔ Settings ➔
.
➔ Settings ➔
Connections 125