Manually Add A New Network Connection - Samsung Galaxy S Relay User Manual

Portable quad-band mobile phone
Table of Contents

Advertisement

Manually Add a New Network Connection

1. From the Wi-Fi network screen, tap Add Wi-Fi network.
2. Enter the Network SSID (the name of your Wireless
Access Point).
3. Tap the Security field and select a security option. This
must match the current security setting on your target
WAP.
4. Enter your WAP's password if the WAP is secure.
5. Tap Save to store the new information and connect to
the target WAP.
6. No prompt to enter the WAP key displays if this is the
second time to connect to a previously accessed or
secured wireless network. The WAP key is required
when the device is reset using factory default settings.
Deactivating Wi-Fi
1. From the Home screen, press
Settings.
2. In a single motion touch and slide the Wi-Fi slider to the
left to turn it off.
– or –
Activate and Deactivate Wi-Fi from the Notification bar.
Note: Use of wireless data connections such as Wi-Fi and
Bluetooth can reduce battery life and use times.
Manually Scan for a Wi-Fi Network
1. From the Home screen, press
Settings
Wi-Fi.
2. In a single motion touch and slide the Wi-Fi slider to the
right to turn it on.
3. Tap Scan.
and then tap
and then tap
214
Connections

Advertisement

Table of Contents
loading

Table of Contents