Table of Contents
Advertisement
3.4
D
RIVE MOUNTING
You can mount the drive in any orientation using four screws in the side-mounting holes or four screws in the bottom-
mounting holes. Follow these important mounting precautions when mounting the drive:
• Allow a minimum clearance of 0.030 in (0.76 mm) around the entire perimeter of the drive for cooling as a guideline.
Please refer to Section 3.5 for final cooling requirements.
• Use only M3 x 0.5 metric mounting screws.
• Four (4) threads (0.080 in) minimum screw engagement recommended. Also ensure maximum screw length does not bot-
tom out in mounting holes.
• Do not overtighten the mounting screws (maximum torque: 4.5 in-lb, ± 0.45 in-lb).
Refer to 4 for detailed mounting configuration dimensions.
See Section 3.4, "Drive mounting."
7mm models
Weight:
5mm models
Note.
These dimensions conform to the Small Form Factor Standard documented in SFF-8201 and
SFF-8223 found at www.sffcommittee.org.
Figure 3.
Mounting configuration dimensions (7mm models)
S
600 SSD P
EAGATE
RODUCT
0.170 pounds
0.148 pounds
M
, R
. A
ANUAL
EV
77 grams
67 grams
17
Advertisement
Table of Contents
