Upnp Configuration - Siemens C2-010 User Manual

C2-010 / C2-010-I ADSL2+ Router User's Guide
expose it under insecurity risk; thus suggest not use this option unless no other alternatives.
DDNS This page allows you to configure the ADSL2+ Router to use the DYNAMIC Domain Name
Service (Dynamic DNS), if you have a previously established account.
RIP This allows you to enable or disable the Routing Information Protocol (RIP) on PVC's that allow
routing.

5.1 UPnP Configuration

UPnP supports zero-configuration networking and automatic discovery for many types of networked
devices. When enabled, it allows other devices that support UPnP to dynamically join a network, obtain an IP
address, convey its capabilities, and learn about the presence and capabilities of other devices. DHCP and
DNS service can also be used if available on the network. UPnP also allows supported devices to leave a
network automatically without adverse effects to the device or other devices on the network.
UPnP can be supported by diverse networking media including Ethernet, Firewire, phone line and power
line networking.
To enable UPnP for any available connection, click to check the Enable UPnP selection box, select the
connection or connections on which you will enable UPnP listed under Available Connections and click the
Apply button.
Figure 5-2. UPnP menu
5-2