SMC Networks Barricade SMC7004ABR User Manual page 84

Configuring the Print Server
•
The Queue Name is LPT1.
•
Verify the LPR Byte Counting Enabled and SNMP Status
Enabled options are unchecked.
15. Once you have verified all of these settings, click the OK
button to save these settings and close the "Configure
Standard TCP/IP Port Monitor" window.
16. Click Next to continue and view a summary of the
configuration that you have just completed.
17. Click the Finish button to complete the configuration process
of the TCP/IP port
18. The Add Printer Wizard will now guide you through the Printer
Driver installation for the LPR port you just installed.
19. In the dialog box listed below, choose the manufacturer of the
printer that you have, and then choose your model of printer.
If your printer is not listed here, then please refer to your
printer documentation to get your printer installed.
76