SMC Networks Barricade SMC7004ABR User Manual page 69

Cable/dsl broadband router built-in 4-port 10/100 mbps switch

Hide thumbs Also See for Barricade SMC7004ABR:

Table of Contents

Tools - Reset

Click APPLY to reset the Barricade Router. The reset will be

complete when the power LED stops blinking.

Note:

If you use the Reset button on the front panel, the

Barricade Router performs a power reset. If the button

is held depressed for over five seconds, all the LEDs

will illuminate and the factory settings will be restored.

Status

The Status screen displays WAN/LAN connection status,

firmware, and hardware version numbers, illegal attempts to

access your network, as well as information on DHCP clients

connected to your network.

Advanced Setup

Table of Contents