Advertisement
Morae Recorder
Change the Communication Port
In some cases, Recorder and Observer cannot connect on the default communication port (5555). In this
case, the study configuration in Recorder and the communication port in Observer must be set to an
alternative port number.
If you change the post in Recorder, all observers must set the same port to connect. Make sure to give
the port number to all potential observers.
To use an alternative port:
1. Contact your system administrator to determine which port to use.
2. In Recorder, select Tools > Preferences.
3. When the Preferences dialog box opens, enter the port number in the Communication port field.
4. Open Observer. In the Connect to Recorder dialog box, click Change Port. Enter the new port
number.
Click Test Port to verify that you can connect to Recorder with this port.
o
Click Restore Default to return to the default port (5555).
o
Page 87
Help PDF
www.techsmith.com
Advertisement
