Advertisement
Morae Recorder
Managing Recording Files
After a recording is complete, Recorder creates one recording (.rdg) file. The .rdg file for the current recording
is stored in the Folder location defined in the study configuration.
If you did not specify a folder in the study configuration, recording files are saved in a default output folder on
the Recorder computer. To view or change the default output folder location, choose Record > Machine
Settings > Preferences tab.
Depending on the storage medium or your network configuration, you may have to take additional steps to
ensure that Manager can access the recording files when you are ready to import them. For more information,
see Moving Recorder Files.
Recording File Processing and Verification
After you complete a recording, there is a delay while the recording file is written out. Once the file is written
out, there is another delay while it is automatically verified by Recorder. During verification, Recorder
examines the file to verify it has been written without any errors. If an error is detected, Recorder notifies you
and gives you the option to either repeat the writing out process or to delete the recording.
If you do not want to wait for file processing and verification to occur between recordings, use the batch
processing feature. For more information, see
Page 106
Batch Process
Recordings.
Help PDF
www.techsmith.com
Advertisement
