Advertisement
Morae Recorder
Quick Tips for Setting Video and Audio Sources
Record from the screen, camera, screen and camera, or two cameras. For more on the video options,
•
see Choose Video Sources.
You can flip your camera video, both vertically and horizontally, so you can set up your camera out of
•
the way of the participant. To flip camera video, click Modify camera settings
If the audio is going into the red in the Audio monitor, move the audio slider to the left. For more on
•
audio levels, see Adjust Audio Level.
Click Test Recording in the Recorder toolbar to create a 15-second video test recording to verify the
•
video and audio. For more information, see
Need to save disk space? You can change the size and frame rate of the recording. See Modify
•
Video Settings.
Morae chooses the recommended codec for screen and camera video. If you want to use a specific
•
codec, see Screen Video Compression Setup Options or Camera Camera Video Compression Setup
Options.
If your video is too dark or you want to zoom in, some cameras allow you to adjust these settings. To
•
change the camera properties and preview the results, see Camera Properties Options.
See also:
Choose Video Sources
•
Examples
•
Choose Audio Source
•
Modify Video Settings
•
Camera Video Settings
•
Choose Video Sources
Use the dropdown lists to select from the various video sources. You can choose both a Main Video and a
PiP Video, or just a main video source.
To see examples screenshots of the various options, see Examples.
If you record both main and PiP videos, after you import the recording into Manager, you can produce
highlight videos with or without the PiP included. You can also adjust the location of the PiP.
Main Video
Select a video source and click Modify screen video/camera settings
Page 54
Create a Test
Recording.
Help PDF
.
to adjust the video settings.
www.techsmith.com
Advertisement
