Advertisement
Morae Recorder
To Run a Test Recording
1. Click the Test Recording button in the Recorder toolbar.
2. A dialog box appears asking if you want to continue with the test recording. Click Yes.
3. The Recorder UI minimizes to a tray icon. The test recording begins immediately and proceeds for 15
seconds.
4. The Recording in progress message appears in the Camera Preview pane and the status bar
confirms a recording is being made.
5. During the test recording, create some sound and activity for Recorder to capture (i.e., speak into the
microphone and actively interact with the computer).
6. At the end of the 15 seconds, the test video plays back and includes the screen video, camera video
PIP and audio from the temporary test file.
When the playback is complete, the window closes automatically. The test recording is not saved for
later viewing.
See also:
Get to Know the Recorder Interface
•
Welcome to Morae Recorder Dialog Box
•
Recorder Toolbar
•
Recording Details
•
Study Details
•
Video and Audio Sources
•
Recorder Preferences
•
How to Use Morae Recorder
•
Recording Details
Recording Details
When you save a study configuration, Recording Details are saved in the study configuration but you can
change them for individual recordings, as needed. For example, if you need to run one session without
capturing screen text, you can change that setting in Recording Details.
Page 11
define how to record a session. These settings can vary for recordings within a study.
Help PDF
www.techsmith.com
Advertisement
