Advertisement
QuickSpecs
Upgrades
This section applies to upgrades within HP Integrity Superdome systems. For information on upgrades from existing HP 9000 Superdome systems to HP
Integrity Superdome systems, please refer to the upgrade section of the HP 9000 Superdome QuickSpec.
Upgrade Availability
Upgrade Availability
Upgrade Availability
Upgrade Availability
Component
Component
Component
Component
Add on Upgrades
Add on Upgrades
Add on Upgrades
Add on Upgrades
Cell Board and CPUs (A6866A and A6924A)
2-GB Memory Module (4×512 MB) (A5198A)
4-GB Memory Module (4×1 GB DIMMs) (A6863A)
PCI-X Chassis (A6864A)
Superdome I/O Expansion Cabinet (A5861A)
Redundant PDCA (A5800A)
Model Upgrades
Model Upgrades
Model Upgrades
Model Upgrades
Superdome 16-way to 32-way
Superdome 32-way to 64-way
Superdome I/O Expansion Cabinet
Upgrade Quick Matrix
Upgrade Quick Matrix
Upgrade Quick Matrix
Upgrade Quick Matrix
Model Upgrade Requirements
Model Upgrade Requirements
Model Upgrade Requirements
Model Upgrade Requirements
Model Upgrade
Model Upgrade
Model Upgrade
Model Upgrade
Superdome 16-way to 32-way
Superdome 32-way to 64-way
HP Integrity Superdome Servers: 16-way, 32-way,
HP Integrity Superdome Servers: 16-way, 32-way,
HP Integrity Superdome Servers: 16-way, 32-way,
HP Integrity Superdome Servers: 16-way, 32-way,
Product Number
Product Number
Product Number
Product Number
A5204A (includes new system
backplane)
A5202A (right cabinet) must be
ordered. A Superdome Service
Solution will be required for the
upgrade. These solutions
(combination of solution level
(Foundation, Proactive, Critical) and
ordering category (1st system,
additional system, additional system
later) are selected in SBW/Watson to
populate the appropriate product
numbers and support. The upgrade
includes the right cabinet and
integrated cells, CPUs, memory and
I/O chassis.
NOTE:
NOTE: At least one cell board
NOTE:
NOTE:
(A6866A) with one active processor
(A6924A), one memory module
(A6439A/A6863A), one I/O Card
Cage (A6864A) and one Core I/O
DA - 11717
Worldwide — Version 1 — June 30, 2003
Availability
Availability
Availability
Availability
Immediate
Immediate
Immediate
Immediate
Immediate
Immediate
Immediate
Immediate
Configuration Detail Required
Configuration Detail Required
Configuration Detail Required Comments
Configuration Detail Required
Serial number
Existing partition
configuration (cell placement,
iCOD, OE license type)
Media requirements (new
DVD, SCSI converter, etc.)
Serial number
Existing partition
configuration (cell placement,
iCOD, OE license type)
Media requirements (new
DVD, SCSI converter, etc.)
and 64-way
and 64-way
and 64-way
and 64-way
Comments
Comments
Comments
TCE Manager and
Deployment Manager
High-level design,
recommended detailed design
Order-entry process through
SBW/Watson Config
(recommended to identify
impact of cell placement,
additional software license,
etc.)
Installation of new backplane
included. For additional add
on components, see table
below.
TCE Manager and
Deployment Manager
High-level design, detailed
design
Order-entry process through
SBW/Watson Config and
Convert to Order required to
place cells in correct slot
locations
Installation included. For
additional add on
components, see table below.
Page 27
Advertisement
