Advertisement
Uses only 2 rack spaces (2U) in standard 19 inch rack
DB9 serial port for network interface; SNMP compatible
Slot for optional SNMP/web card (part# SNMPWEBCARD)
PowerAlert unattended shutdown software and 6 ft. network cable included
Compatible with Tripp Lite's Watchdog system service software
Fault tolerant auto-bypass maintians continuous utility output to connected equipment, even in cases where the UPS is overloaded or
suffers an internal failure that requires service
Diagnostic LEDs
Battery replacement door
Mounting hardware included for 4 post rack enclosures, 2 post telecom rack compatible with separate purchase 2POSTRMKIT accessory
$250,000 Ultimate Lifetime
2 year manufacturers product warranty
Specifications
OUTPUT
Frequency
50 / 60 Hz
compatibility
Output VA
1500
Output watts
1200
Output nominal
120V AC
voltage
Output voltage
Maintains full-time sine wave output within 2% of 120V, less than 5% total harmonic distortion
regulation
Output frequency
Regulates line frequency to 50/60Hz +/- 0.05Hz
regulation
Overload protection
Via input breaker
Outlet quantity /
6 NEMA 5-15R
type
Customized load
"2 individually controllable load banks support automated load shedding and remote reboot on demand of locked
management
network devices. Configurable via PowerAlert software to automatically switch off optional loads, like monitors, to
receptacles
increase available runtime for servers and other critical devices. (Bank A consists of 4 outlets / Bank B consists of 2
outlets) "
INPUT
UPS Input cord
10 ft. 12 gauge
length (ft.)
Recommended
15A 120V
Electrical Service
Maximum Input
12
Amps (A)
Maximum Input
1395
Watts
Input connection
NEMA 5-15P
type
Voltage
120
compatibility (VAC)
BATTERY
Expandable battery
Supports extended runtime with optional external battery pack BP48V212U (multi-pack compatible)
runtime
connected equipment insurance
Advertisement
