Operating Instructions; Operating The Dishwasher - Viking 100 Series Use & Care Manual

Built-in dishwasher
Hide thumbs Also See for 100 Series:
Table of Contents

Advertisement

Operating the Dishwasher

1: On/Off Button
2: Half Load Indicator LED*
3: Salt Level Indicator LED
4: Start/Pause/Cancel Indicator LED
5: Start/Pause/Cancel Button
6: Time Delay Button
7: Time Delay Indicator LED
8: Rinse Level Indicator LED
9: Remaining Time Indicator/
9:
Delay Time Indicator
• Open the door and load the dishwasher.
• Check that both upper and lower spray arms move freely.
• Pour correct amount of detergent into the detergent dispenser and
close the lid.
• Push in the On/Off button 1 and check that the display lights come
on.
• Check the rinse agent level indicator LED 8. If necessary, refill the
rinse agent.
• Check the salt level indicator LED 3. If necessary, refill salt (select
models).
• Use the Program Selection button 13 to choose your washing
program.
• When there are few dishes, additionally use the Half Load
function.
• Depending on the hardness level of the tap water, the Tablet
Detergent function allows better drying and washing performance
from the multi-purpose tablets.
• Start the program with the Start/Pause/Cancel button 5.
• Close the door and the program will start.
• When the wash program has ended, an electronic beep will sound
and will continue every 10 seconds. After two minutes of elapsed
time, the sound will stop. The beep can also be stopped by
opening the door or by pressing the On/Off button 1.
• Press the On/Off button 1 and open the door after the program is
completed. The indicator lights will go off.
• Allow your dishes to cool for 15 minutes, with the door open.
• Unload the dishes. Begin with the lower rack.
20
10: Tablet Detergent Indicator
11: Program Indicator
12: Half Load/Tablet Button
13: Program Selection Button

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents