Viking 100 Series Use & Care Manual page 37

Care and Maintenance
• Remove the lower rack from the machine.
• Turn the coarse filter counterclockwise to the left and pull it out in
an upward direction A.
• Pull out the main filter B.
• Press on the two tabs of the coarse filter and remove the micro filter
C.
• Clean the filters thoroughly under running water. Use a brush if
necessary.
• Replace main filter.
• Replace the micro filter and the coarse filter into the main filter.
• Twist it clockwise until it clicks into place.
operate your dishwasher without a filter. You will damage your
DO NOT
machine. Ensure that your filters are correctly installed.
37