Viking 100 Series Use & Care Manual page 30

Operating the Dishwasher
Setting the Water Softener
• Press the Program Selection button before you switch the appliance
on and keep this button pressed down.
• Switch the appliance on using the On/Off button; then release the
switch.
• Release the Program Selection button when the water hardness
level stored on your machine is displayed in "r....." format.
• Start/Stop icon will start flashing as soon as the water hardness level
store on your machine.
• Water hardness can be set to the desired level by pressing the Time
Delay button (compare the test strip with the degrees of Hardness
Table). The appropriate program lights up.
• Once you have set the hardness level, press the Start/Stop/Cancel
button to save the value. The control indicator on the
Start/Stop/Cancel button now lights up permanently.
• Switch the appliance off again using the On/Off button.
30