Door Removal; Door Replacement And Adjustment - Viking F20937C Use & Care Manual

Door Removal

WARNING
TO PREVENT
PERSONAL INJURY
Before removing the doors,
make sure the pins are properly
installed in the hinges. Failure
to do so can result in personal
injury to hands and/or fingers.
2
Remove hinge trim screws
and hinge trim.
4
Lift door up and out.
42
1
Open door completely. Place pins,
supplied with unit, in pin holes. For
personal safety, ONLY use pins
supplied with the unit.
3
Close until pins stop door.

Door Replacement and Adjustment

1
Reinstall door to range.
3
Remove pins from holes in hinges.
5
If the door needs to be adjusted, loosen hinge
trim screws located in Step 2. Adjust the screws
located between the door and kickplate
using a 5/32" hex head allen wrench. After
adjustment, tighten hinge trim screws.
2
1
Open door completely.
Reinstall hinge trim on both sides.
4
Close door.
43