Chapter 2: Installing the Communicator
Package
The Communicator software package is delivered as an Avalanche package.
To obtain the package, download it from the Wavelink Web site or contact
Wavelink Customer Service.
The Communicator package must be installed to an Avalanche Console
through a software profile before if can be configured or deployed to your
mobile devices. You can add the package to an existing software profile or
create a new profile. There are two methods you can use to create a profile:
•
Through the Software Profiles tab
•
Using the Add Device Software Wizard
The following steps provide instructions for using the wizard. If you would
like to know more about the Software Profiles tab method refer to the
Avalanche User Guide.
To add a software profile:
1
From the Quick Start tab, select Add Device Software.
The Add Device Software Wizard launches.
7