Configuring Notification Options; Notification Set Up; All Devices - Wavelink Communicator wlcug1020090331 User Manual

Configuring Notification Options

6
In the available text box, enter the IP address and subnet of where you
want the multicast for this network profile to go.
7
Click Insert.
8
Continue adding IP addresses that you want to include in the profile.
9
When you are finished, click Apply and then click OK.
Once the client portion of the Communicator is deployed, the mobile
device will be configured with the profile.
The notification options allow you to customize the way you want your
mobile device user to be alerted that someone is calling or paging. You can
configure the following notification options:
•
Notification Set up
•
All Devices
•
Wave Files
•
Calling Notifications
•
Paging

Notification Set up

These options are available based on the specific features of the mobile
device.
•
Use Beeper If Available. If enabled, this option configures the device to
beep if the Communicator is attempting contact.
•
Use Vibrate Mode If Available. If enabled, this option configures the
device to vibrate if the Communicator is attempting contact.

All Devices

•
Sound. This list allows you to select a system sound that plays when a
page is received. You can select one of the system sounds listed in the box.
31