Private Calling; Channels; Quit Action; Hands Free - Wavelink Communicator wlcug1020090331 User Manual

You can configure the following identification properties:
•
Enable CESecure Login. If enabled, CESecure will be queried for the
current user id logged into the Avalanche Console.
•
Disable Name Change. If enabled, this option will ensure the users cannot
change the device name.
•
Custom Name Property. Configure this text box to specify an Avalanche
property that will be read from the device to be used as the user identity.

Private Calling

•
Enabled. If enabled, this allows private messaging between mobile
devices. If not enabled, mobile devices will not be allowed to call privately.
All communications will be heard through the Communicator Console
and any mobile devices on the same channel.
•
Auto Accept. If enabled, this option forces the device to automatically
accept the call. The device user cannot reject a call.

Channels

•
Scanning. When enabled, this allows the Communicator to scan every
available channel.
•
xmit Chan drop‐down. Enables you to select which channel you want the
device to transmit on.

Quit Action

•
Quit Action drop‐down. This option gives you the choice to either
minimize the Communicator or exit completely upon selecting to quit the
program.

Hands Free

•
This option allows you to configure the number of seconds before
communication will stop if you are using the Hands Free mode. The
option is configured in seconds with the default being zero (meaning that
in order to end communication you must manually click the button).
When the configured time has elapse, the Communicator will cease
transmission to the mobile device. When setting the number of seconds, be
27