Adding Channels
6
From the list, select the networks you want to include in the zone.
7
Click Apply.
The new Zone will appear in the list box. The configuration will be applied
to the mobile devices upon next deployment.
Deleting Zones
If you no longer need a zone, you can delete it.
To delete a Zone:
1
Access the Configuration Console and click the Zones tab.
2
From the list, select the Zone you want to remove and click Delete.
3
Click Apply.
The Zone will not be available.
A channel is a port on a IP address. Configuring additional channels allows
you to assign exactly which channels can be used in each Zone. It is another
way to segment your network communications.
You cannot use duplicate ports and channels. Ports must be an even number.
•
Name. Specifies the name of the channel. You can name your channels
anything to help you distinguish between them.
•
Zone. Assigns the Zone for the channel. If you do not have any Zones
configured, you will not be able to configure the channel.
•
Port. The port must be an even number. Duplicate ports and channels are
not allowed. The port number must be greater than zero but less than
65535.
•
Enable. You must select the Enable option for the channel to be available.
To add a Channel:
1
Access Channels tab from the Configuration Console.
51