18
Activating Demo Mode
Releasing Licenses
4
In the Wavelink Activation dialog box, click Close.
If you are installing the Communicator for demonstration purposes, you can
run it in demo mode. Demo mode authorizes the Communicator to manage
up to two mobile devices for 30 days.
To activate demo mode:
1
Access the Wavelink Activation dialog box by clicking Start > All Programs
> Wavelink Avalanche MC > Activate.
The Wavelink Activation dialog box appears.
2
Click Demo.
Avalanche MC will run in demo mode.
Licenses for mobile devices are frequently redistributed, providing flexibility
in managing licenses. To encourage redistribution, you can configure the
Mobile Device Server to release licenses from mobile devices that have not
connected to the network within a specific number of days. You can also
release licenses by deleting devices from the Mobile Device Inventory.
For information about releasing licenses, refer to the Wavelink Avalanche User
Guide, Chapter 9: Managing Mobile Device Distributed Servers.
Wavelink Communicator