Download Print this page
Valcom IP Solutions VIP-120 User Manual

Valcom IP Solutions VIP-120 User Manual

One-way ip ceiling speaker

Advertisement

Quick Links

ONE-WAY IP CEILING SPEAKER
INTRODUCTION
The VIP-120 One-Way IP Ceiling Speaker enables
voice access to a single zone of one-way paging
over an IP-based LAN/WAN. This allows a page
zone extension anywhere on the network. The
speaker level is electrically adjusted during set up.
The enclosure is made of steel with a durable white
powder coated finish. Power is provided to the
VIP-120 via a Power over Ethernet switch meeting
the 802.3af specification.

SPECIFICATIONS

Access Methods
PBX, FXO Port w/VIP-811
POTS telephone set w/VIP-811
PBX, FXS Port w/VIP-821
Valcom M Cast Page Group
SIP – enabled telephone system
Features
RJ-45 network connection
Power over Ethernet (POE) 802.3af compatible
High Efficiency Class-D Amplifier
INSTALLATION

FCC Information

This equipment has been tested and found to
comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference when the equipment is
operated in a commercial environment. This
equipment generates, uses and can radiate radio
frequency energy and if not installed and used in
accordance with the instruction manual, may cause
harmful interference to radio communications.
Operation of this equipment in a residential area
may cause harmful interference in which case the
user will be required to correct the interference at
his own expense.
VIP-120
DIMENSIONS/WEIGHT
13.00" Dia x 3.00" D
(33.02cm Dia. x 7.62cm D)
Weight: 2.5 lbs (1.13 kg)
Environment
Temperature:
Humidity:
Precautionary Designations
CAUTION: To reduce the risk of electric shock,
Refer servicing to qualified serv ice personnel.

Packing List

Qty.
1
1
1
0 to 85% non-precipitating
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Do not remove cover.
No user serviceable parts inside.
This symbol indicates that dangerous
voltage constituting a risk of electric
shock is present within this unit.
This symbol indicates that there are
important operating and maintenance
instructions in the literature accompanying
this unit.
Item
VIP-120
VSP Document
Issue 1
Issue 3
0 to +40° C
947635

Advertisement

loading

Summary of Contents for Valcom IP Solutions VIP-120

  • Page 1: Specifications

    The speaker level is electrically adjusted during set up. The enclosure is made of steel with a durable white powder coated finish. Power is provided to the VIP-120 via a Power over Ethernet switch meeting the 802.3af specification. SPECIFICATIONS DIMENSIONS/WEIGHT Access Methods ...
  • Page 2: Technical Assistance

    VIP-120 using a computer. The PC used for programming should be connected to the same subnet as the VIP-120. Setup will be done using the IP Solutions Setup Tool. Download the latest version of the free IP Solutions Setup Tool from the Valcom web site at www.valcom.com/vipsetuptool...
  • Page 3 VALCOM LIMITED WARRANTY Valcom, Inc. warrants its products only to the original purchaser, for its own use, to be free from defects in materials and workmanship under conditions of normal use and service for a period of one year from the date of shipment. This Limited Warranty obligation shall be limited to the replacement, repair or refund of any such defective device within the warranty period, provided that: 1.