Download Print this page
Valcom VIP-140A Manual

Valcom VIP-140A Manual

Ip talkback clean room ceiling speaker

Advertisement

Quick Links

IP Talkback Clean Room Ceiling Speaker
INTRODUCTION
The VIP-140A IP Talkback Clean Room Ceiling
Speaker enables voice access to a single zone of
one-way paging over an IP-based network. The
enclosure is made of steel with a durable white
powder coated finish. O-rings, washers and a
polycarbonate shield protect against dust incursion.
Power is provided to the VIP-140A via a Power over
Ethernet (PoE) switch meeting the 802.3af
specification.
SPECIFICATIONS
Access Methods
PBX, FXO Port w/VIP-811
POTS telephone set w/VIP-811
PBX, FXS Port w/VIP-821
Valcom M Cast Page Group
SIP – enabled telephone system
Features
RJ-45 network connection
Power over Ethernet (POE) 802.3af compatible
Large rubber O-ring to seal the grille to the
ceiling
Polycarbonate dust shield between the speaker
and grille
Rubber washers for all mounting hardware
INSTALLATION
FCC Information
This equipment has been tested and found to
comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference when
the equipment is operated in a commercial
environment. This equipment generates, uses
and can radiate radio frequency energy and if
not installed and used in accordance with the
instruction manual, may cause harmful
interference to radio communications.
Operation of this equipment in a residential area
may cause harmful interference in which case
the user will be required to correct the
interference at his own expense.
VIP-140A
DIMENSIONS/WEIGHT
13.0" Dia x 3.8" D
(33.0cm Dia. x 9.7cm D)
Weight: 2.5 lbs (1.13 kg)
Environment
Temperature:
Humidity:
Precautionary Designations
Packing List
Qty.
1
1
1
0 to 85% non-precipitating
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: To reduce the risk of electric shock,
Do not remove cover.
No user serviceable parts inside.
Refer servicing to qualified serv ice personnel.
This symbol indicates that dangerous
voltage constituting a risk of electric
shock is present within this unit.
This symbol indicates that there are
important operating and maintenance
instructions in the literature accompanying
this unit.
Item
VIP-140A
VSP Document
Mounting Hardware
947832
Issue 2
0 to +40° C

Advertisement

loading

Summary of Contents for Valcom VIP-140A

  • Page 1 O-rings, washers and a polycarbonate shield protect against dust incursion. Power is provided to the VIP-140A via a Power over Ethernet (PoE) switch meeting the 802.3af specification. SPECIFICATIONS...
  • Page 2 The -10dBm Line Level Out may be connected to 6. Clean only with dry cloth. Nettoyer avec un chiffon sec. up to 40 Valcom Self Amplified Speakers in order to 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
  • Page 3 VALCOM LIMITED WARRANTY Valcom, Inc. warrants its products only to the original purchaser, for its own use, to be free from defects in materials and workmanship under conditions of normal use and service for a period of one year from the date of shipment. This Limited Warranty obligation shall be limited to the replacement, repair or refund of any such defective device within the warranty period, provided that: 1.