Download Print this page
Valcom VIP-160A Manual

Valcom VIP-160A Manual

Ip talkback 8” ceiling speaker

Advertisement

Quick Links

IP TALKBACK 8" CEILING SPEAKER
INTRODUCTION
The VIP-160A IP Talkback 8" Ceiling Speaker
enables handsfree talkback access to a single
location over an IP-based LAN/WAN. This allows
handsfree communication anywhere on the
network. The VIP-160A levels are adjusted
electrically via software during setup. A call switch
input is provided for call in initiation. Power is
provided to the VIP-160A via a Power over Ethernet
(PoE) switch meeting the 802.3af specification.
SPECIFICATIONS
Access Methods
PBX, FXO Port w/VIP-811
POTS telephone set w/VIP-811
PBX, FXS Port w/VIP-821
Valcom M Cast Page Group
SIP – enabled telephone system
Features
RJ-45 network connection
802.3af compliant
High Efficiency Class-D Amplifier
INSTALLATION
FCC Information
This equipment has been tested and found to
comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference when
the equipment is operated in a commercial
environment. This equipment generates, uses
and can radiate radio frequency energy and if
not installed and used in accordance with the
instruction manual, may cause harmful
interference to radio communications.
Operation of this equipment in a residential area
may cause harmful interference in which case
the user will be required to correct the
interference at his own expense.
VIP-160A
DIMENSIONS/WEIGHT
13.0" Dia x 3.8" D
(33.0cm Dia. x 9.7cm D)
Weight: 2.5 lbs (1.13 kg)
Environment
Temperature:
Humidity:
Precautionary Designations
Packing List
Qty.
1
1
1
0 to 85% non-precipitating
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: To reduce the risk of electric shock,
Do not remove cover.
No user serviceable parts inside.
Refer servicing to qualified serv ice personnel.
This symbol indicates that dangerous
voltage constituting a risk of electric
shock is present within this unit.
This symbol indicates that there are
important operating and maintenance
instructions in the literature accompanying
this unit.
Item
VIP-160A
VSP Document
947801
Issue 2
0 to +40° C

Advertisement

loading

Summary of Contents for Valcom VIP-160A

  • Page 1 The VIP-160A levels are adjusted electrically via software during setup. A call switch input is provided for call in initiation. Power is provided to the VIP-160A via a Power over Ethernet (PoE) switch meeting the 802.3af specification. DIMENSIONS/WEIGHT SPECIFICATIONS ...
  • Page 2 (A metal backbox with rails is available separately as model V-9916M). Network Connection The VIP-160A has one RJ-45 network connector on the rear panel. Use a standard patch cable to connect the VIP-160A to an Ethernet switch providing Power over Ethernet (PoE) meeting the Figure 1.
  • Page 3 VALCOM LIMITED WARRANTY Valcom, Inc. warrants its products only to the original purchaser, for its own use, to be free from defects in materials and workmanship under conditions of normal use and service for a period of one year from the date of shipment. This Limited Warranty obligation shall be limited to the replacement, repair or refund of any such defective device within the warranty period, provided that: 1.