Table of Contents
Advertisement
1 Notes on this manual
2 Safety instructions
1.3
Symbols used
The following hazard classification symbols are used for
information, activities and energy saving tips in this op-
erating manual.
d
Danger!
Immediate risk of serious injury or death
H
Danger!
Danger of burning and scalding!
a
Caution!
Potentially dangerous situation for the
product and environment.
h
Note!
Useful information and instructions.
This symbol points you to energy saving tips. You can
put this setting into effect by means of the heat pump
control system, among other things.
• Symbol for a necessary task
1.4
Applicability of the manual
This operating manual applies exclusively to units with
the following article numbers:
0010007274
0010007275
0010007276
The part number of your unit can be obtained from the
identification plate.
4
2
Safety instructions
Observe the following safety instructions and regula-
tions when operating the heat pump:
• Take advantage of the extensive instruction in the op-
eration of the heat pump provided by your specialist
technician.
• Carefully read through this operating manual.
• Only carry out activities that are described in this op-
erating manual.
H
Danger!
Risk of burning as a result of contact
with heat pump components!
High temperatures can appear on heat
pump components.
Do not touch any uninsulated pipes on
the heat pump.
Do not remove any of the cladding sec-
tions (apart from the pillar cover, see
Chap. 1.2).
2.1
Coolant
The heat pump is delivered with an operational filling of
R 407 C coolant. This is a chlorine-free coolant which
does not affect the Earth's ozone layer. R 407 C is nei-
ther a fire hazard nor an explosion risk.
a
Caution!
This appliance contains R 407 C coolant.
The coolant must not be allowed to es-
cape into the atmosphere. R 407 C is a
fluorinated greenhouse gas covered by
the Kyoto Protocol, with a GWP of 1653
(GWP = Global Warming Potential).
Before the appliance is disposed of, the
coolant it contains must be completely
drained into a suitable vessel so that it
can then be recycled or disposed of in
accordance with the regulations.
d
Danger!
Risk of injury from freezing as a result
of contact with the R 407 C coolant!
Escaping coolant can cause freezing if
the exit point is touched:
Do not inhale gases or vapours emanat-
ing from leaks in the coolant circuit.
Avoid contact with the skin and eyes.
h
Note!
R 407 C presents no danger in normal
use and under normal conditions. With
improper use, however, it can cause inju-
ry and damage.
Operating Manual geoTHERM exclusive VWS 0020071929_00
Hide quick links:
Advertisement
Table of Contents
