Related Manuals for Vaillant ecoCRAFT VKK GB 806/2-E-H
Summary of Contents for Vaillant ecoCRAFT VKK GB 806/2-E-H
- Page 1 For the owner Operating manual ecoCRAFT Modular Gas Condensing Boiler VKK GB 806/2-E-H VKK GB 1206/2-E-H VKK GB 1606/2-E-H VKK GB 2006/2-E-H VKK GB 2406/2-E-H VKK GB 2806/2-E-H...
-
Page 2: Table Of Contents
Vaillant service ......13 compatibility (Council Directive 89/336/EEC). -
Page 3: Safety Instructions 2
Notes on the documentation 1 Safety instructions 2 Danger! Risk of poisoning and explosion due to a malfunction Never put the safety devices out of operation or tamper with them so as to impair their function. Therefore, do not attempt any modifications: - To the appliance - Around the appliance - To the gas, air, water and electricity supply pipes... -
Page 4: Notes On The Installation And Operation
Vaillant assumes no liability for this and such Requirements of the installation site consequential damages. The Vaillant gas heating boilers ecoCRAFT must be installed in boiler rooms. -
Page 5: Recycling And Disposal
Notes on the installation and operation 3 Recycling and disposal Setting the operating mode Both your Valliant ecoCRAFT gas heating boiler and its In warmer seasons, when the apartment needs no packaging consist mainly of recyclable raw materials. heating, turn the heating to summer mode. The heating mode is then shut off, however, the device or the plant 3.4.1 Appliance remains ready for operation for water heating. -
Page 6: Operation
These circulation pumps can also be used with the Vaillant ecoCRAFT. There is no doubt that they provide increased comfort for hot water heating. Please bear in mind, however, that these pumps consume electricity. -
Page 7: Overview Of The Operating Field
Operation 4 Overview of the operating field Switching the unit on and off Fig. 4.1 Controls Fig. 4.2 Switching the unit on and off The operating elements have the following functions: Caution! +/- buttons: After the parameters have been The mains switch may only be actuated if the called up, the buttons "+"... -
Page 8: Operator Field With Multi-Function Display
4 Operation Operator field with multi-function display The following displays occur under normal operating conditions: Operation Description of functions code Standby, no heating function The fan on the relevant module starts up and prevents the burner chamber Ignition is active, the burner ignites The burner burns in heating mode The burner burns in hot water mode The air pressure monitor responds... - Page 9 Operation 4 Overview of the operating levels Hotwater pre-set Operation mode Setting the maximum temperature Parameter No. Parameter No. Parameter No. Factory setting (max.) Factory setting may not Factory setting may not Store set value with “OK” be changed be changed Boiler return temperature Boiler feed temperature Parameter No.
-
Page 10: Settings For The Heating And Hot Water
4 Operation Settings for the heating and hot water Diagnosis mode operation In the diagnosis mode, you can have the individual Virtually all the settings required for the matching of parameters of the boiler displayed. These settings your boiler to the heating installation will have been cannot be changed. -
Page 11: Troubleshooting 5
Troubleshooting 5 Troubleshooting The boiler will then perform a self-test. The basic display appears on the multi-function display after the fault has If the boiler does not start, first check the following been resolved successfully. points: – Is the gas valve open? Danger! –... -
Page 12: Care And Maintenance
The addition of chemicals such as e.g. frost and reliability and a long working life for your Vaillant corrosion prevention materials (inhibitors) is ecoCRAFT. not permitted. -
Page 13: Measuring And Checking Work By The Chimney
When using a Vaillant exhaust gas duct adaptor for Vaillant warranty Vaillant plastic exhaust systems (accessories), there is an Vaillant provide a full parts and labour warranty for this additional facility (1) for checking, at the back, on the appliance.