Restoring The Parameters To The Default Settings - Vaillant VRC 430f Operating And Installation Manual

Code layer
enable
Code number
> Enter code
Fig. 6.3 Screen 15
The default code is 1 0 0 0.
You can change the code on screen C24.
After entering the correct code you automatically reach
screen C1.
6.3 Restoring the parameters to the default
settings
The default settings for the VRC 430f can be restored
as follows:
Press both dials simultaneously for 10 seconds.
This takes you to the default settings screen.
Th. 12.01.06
11:46
Default setting
Cancel
Timer programme
Everything
Default settings
Fig. 6.4
Menu point Input Result
Cancel Yes The set parameters remain effective
Time pro- All programmed time windows are de-
Yes
gramme leted
All parameters are restored back to the
Everything Yes
default settings
Table 6.1 Menu selection, Default settings screen
Once the input is confirmed the display reverts to the
basic display or default display.
Installation instructions VRC 430f 0020042470_01
0 0 0 0
3.0 °C Outdoor
No
No
No
screen
15
Initial commissioning 6
11