Wall-Mounting The Controller - Vaillant VRC 430f Operating And Installation Manual

2
Fig. 4.3 Installing the wall mount
Drill two holes with diameter 6 mm to match the fix-
ing holes.
Insert the plugs supplied.
Mount the wall bracket using the two screws (1, 2)
(see Fig. 4.3).
Fig. 4.4 Sterting up the outside wireless sensor
Key
1 LED
2 Buttons
Activate the radio outdoor sensor by pressing the
red<> button on the reverse side on the right (2), e.
g. using a pen. The green LED (1) flashes for approx.
30 seconds.
Note!
h
The radio outdoor sensor must always be oper-
ated in conjunction with the heating unit, oth-
erwise no information (e.g. outside tempera-
ture) will be transmitted to the radio receiver.
Installation instructions VRC 430f 0020042470_01
1
Fig. 4.5 Securing the radio outdoor sensor
Press the radio outdoor sensor onto the wall brack-
et until it snaps into place.
1
2
4.6
During initial start-up in the chosen location, ensure the
signal path is not adversely blocked by electrical devices
or building components. If the signal path is impaired an
alternative installation location must be found.
Fig. 4.6 Installing of the VRC 430f
Key
1 Controller VRC 430f
2 Wall plinth
3 Mounting openings

Wall-mounting the controller

Assembly 4
1
2
3
7