Active Power + Phase Angle Measurement - UNI-T UT231 Operating Manual

starts recording the maximum AC current True RMS
value.
6.
Press MAX/MIN again, the LCD displays MIN, it
starts recording the minimum AC current True RMS
value.
7.
Press MAX/MIN again to show the present AC
current True RMS value.
8.
The display shows OL when the current of the
tested conductor is higher than 1000A rms.
Note
When the measurement has been completed,
disconnect the connection between the conductor
under test and the jaw, and remove the conductor
away from the transformer jaw of the Meter.
16
Model UT231: OPERATING MANUAL
C. Active Power (main display) + Phase Angle
(secondary display) Measurement (see figure 6)
Brack
Figure 6
Red