UNI-T UT60A Operating Manual page 18

Model UT60A: OPERATING MANUAL
Measurement Ranges (2)
To enter and exit the manual range mode:
1. Press RANGE.
The Meter enters the manual range mode and
turns off.
Each presses of RANGE increments the range.
When the highest range is reached, the Meter wraps
to the lowest range.
2. To exit the manual range mode, press and hold
RANGE for over 2 seconds.
The Meter returns to the autorange mode and
is displayed.
Note
l
If you manually change the measurement range
after entering the REL or Hold modes, the Meter
exits these modes.
l
Under frequency/duty cycle and capacitance
measurement, only autorange mode is available.
18