Measuring Resistance - UNI-T UT207 Operating Manual

B. Measuring Resistance (see figure 4)
Warning
To avoid damages to the Meter or to the devices
under test, disconnect circuit power and
discharge all the high-voltage capacitors before

measuring resistance.

The resistance ranges are:
660 , 6.6k , 66k , 660k , 6.6M
To measure resistance, connect the Meter as
follows:
Insert the red test lead into the V Hz terminal
1.
and black test lead into the COM terminal.
Set the rotary switch to
2.
measurement is a default or press SELECT
to switch to measurement mode.
Model UT207/208: OPERATING MANUAL
and 66M
Resistance
20
Red
Black
Figure 4