Frequency Measurement - UNI-T UT207 Operating Manual

E. Frequency Measurement (see figure 7)
Warning
To avoid harms to you or damages to the Meter
from eletric shock, do not attempt to measure
voltages higher than 600V AC/DC, although
readings may be obtained.
The frequency ranges are:
660Hz, 6.6kHz, 66kHz, 660kHz, 6.6MHz and 66MHz.
To measure frequency, connect the Meter as follows:
1. Insert the red test lead into the V Hz terminal
and the black test lead into the COM terminal.
2. Set the rotary switch to %Hz. Frequency
measurement mode is a default or press SELECT
to switch to Hz measurement mode.
3. Connect the test leads across with the object
Model UT207/208: OPERATING MANUAL
26
Red
Black
Figure 7