Dc Current Measurement - UNI-T UT33B Operating Manual

Model UT33B/C/D: OPERATING MANUAL
Measurement Operation (5)
C. DC Current Measurement
(see figure 3)
Warning
Never attempt an in-circuit current
measurement where the voltage between
terminals and ground is greater than 60V.
If the fuse burns out during measurement,
the Meter may be damaged or the operator
himself may be hurt. Use proper terminals,
function, and range for the measurement.
When the testing leads are connected to
the current terminals, do not parallel them
across any circuit.
( figure 3)
17