U-Line 3018CLR SERIES Use And Care Manual page 8

Modular 3000 series 120v, 3018clr models
Hide thumbs Also See for 3018CLR SERIES:
Table of Contents

Advertisement

Fahrenheit / Celsius
Up
Down
Temperature and Set point information can be displayed in either
Fahrenheit or Celsius.
To change from Fahrenheit to Celsius enter the Fahrenheit / Celsius
menu from within the Customer Menu.
1. Use Down
to select "Degrees".
2. Press Select
. The selection will begin to flash.
3. Use Up
or Down
to select between °F (Fahrenheit) or °C
(Celsius).
4. Press Select
to confirm your choice.
Clean Cycle
Up
Down
A clean cycle can be initiated through this menu. Once the cleaning
cycle starts, the cycle cannot be stopped until complete.
To initiate a clean cycle, enter the Clean Cycle in the Customer
Menu. Please refer to CLEANING section regarding proper cleaning
procedure.
1. Use Down
to select "Clean Cycle".
2. Press Select
. The clean cycle will now begin.
3. Refer to CLEANING section regarding proper cleaning procedure.
Select
RETURN TO MENU
FARENHEIT/CELSIUS
DEGREES = °F
Select
RETURN TO MENU
CLEAN CYCLE
CLEAN?
Silent Mode
Users can halt ice production for 3 hours with an option called
"Silent Mode" in the Customer Menu. Silent Mode will begin once
the current ice making cycle is complete. After 3 hours in Silent
Mode, normal ice production will continue.
NOTE: Silent Mode will not silence any alerts.
To initiate Silent Mode, enter Silent Mode Menu from within the
Customer Menu.
Activating Silent Mode
1. Use Down
2. Press Select
Cancelling Silent Mode
1. Use Down
2. Press Select
Ice Adjust
The Ice Adjust option adjusts ice thickness by adding or subtracting
up to 5 minutes of ice production.
To change the ice thickness, enter the Ice Adjust menu from within
the Customer Menu.
To adjust thickness
1. Use Down
2. Press Select
3. Use Up
thinner.
4. Press Select
Use & Care Guide
Up
RETURN TO MENU
SILENT MODE
SILENCE?
Down
to select "Silence?".
. Silent Mode will now begin.
to select "Cancel?".
. Silent Mode will end.
Up
RETURN TO MENU
ICE ADJUST
ICE ADJUST = 0
Down
to select "Ice Adjust".
. The selection will begin to flash.
to make the ice thicker or Down
to confirm your choice.
Ice Machines
Select
Select
to make the ice
5

Advertisement

Table of Contents
loading

Table of Contents