Reversing Black Or White Doors - U-Line U-CO2175FB-00 Use And Care Manual

Door Reversability
Location of the unit may make it desirable to mount the door on
the opposite side of the cabinet. Many doors are reversible. See
table below.
Model Reverse
U-2175RFB-00 YES
U-2175RFS-00 NO
U-2175RFS-01 NO
U-2175RFW-00 YES

Reversing Black or White Doors

• The Hinge hardware will be removed and reinstalled on the
opposite side of the cabinet.
• The top hinge hardware will be reinstalled on the bottom of the
opposite side of the cabinet.
• The bottom hinge hardware will be reinstalled on the top of the
opposite side of the cabinet.
Remove Door
1. Hold door to keep it from falling.
2. Remove hinge screw pin (1) from top hinge using a Phillips
screwdriver.
3. Remove door by tilting forward and lifting door off bottom hinge
closer inserts.
4. Reinstall hinge screw pin (1) into top hinge using a Phillips
screwdriver.
Remove hole plugs.
Remove plastic screw plugs (three each, top and bottom) (3)
from new hinge location. Save for reinstallation later.
13
Model Reverse
U-CO2175FB-00 YES
U-CO2175FS-00 NO
U-CO2175FS-01 NO
U-CO2175FW-00 YES
U-Line Self Closing Doors
Remove existing top hinge.
Remove existing top hinge (three screws) (2).
Reinstall hinge to bottom opposite.
1. Install the hinge just removed from the top to the BOTTOM
opposite side of the cabinet (three screws) (2).
2. Remove the two door closer inserts (4) from the existing
bottom hinge.
3. Install door closer inserts as shown on the new bottom hinge
(4).
Remove preexisting bottom hinge.
1. Remove the preexisting bottom hinge (three screws) (2).
Reinstall hinge to top opposite.
1. Install the hinge just removed from the bottom to the TOP
opposite side of the cabinet (three screws) (2).
Reinstall Hole Plugs.
1. Install plastic screw plugs (three each, top and bottom) (3) into
holes where hinge hardware was removed.
1