G Integrated I/O Ports Screen - TYAN Thunder i860 S2603 User Manual

3.2-G. Integrated I/O Ports screen
Options related to the integrated I/O interface ports can be altered through this screen.
Serial Port A (.. B)
Base I/O
Interrupt
Parallel Port
Mode
(continued on next page)
Thunder i860 S2603
FORMAT: [option]
OPTIONS: Disabled
Enabled
Auto
FORMAT: [option]
OPTIONS: 3F8, 2F8
3E8, 2E8
NOTES: Recommended combinations include '3F8,
IRQ4' and '2F8, IRQ3'.
FORMAT: [option]
OPTIONS: IRQ4
IRQ3
NOTES: Recommended combinations include '3F8,
IRQ4' and '2F8, IRQ3'.
FORMAT: [option]
OPTIONS: Disabled
Enabled
Auto
FORMAT: [option]
OPTIONS: Output only
Bi-directional
EPP
ECP
'Disabled' turns off the
port.
'Enabled' requires you to
enter the base I/O
address and the INT num-
ber on the next line.
'Auto' makes the BIOS
configure the port during
POST.
These options are depen-
dent on the IRQ, and vice
versa.
These IRQs are paired
with the Base I/O option.
'Disabled' turns off the
port.
'Enabled' requires you to
enter the base I/O
address and the INT num-
ber.
'Auto' makes the BIOS
configure the port during
POST.
Standard one-way proto-
col for parallel devices.
Two-way protocol for par-
allel devices.
Enhanced Parallel Port
interface may provide
higher bandwidth, if an
EPP device is used.
Enhanced Capability Port
interface may provide
higher bandwidth, if an
ECP device is used.
41