Feature
Mem Clock Mode
Node Memory Interleave
Dram Block Interleave
Large Memory Simulation
MTRR Mapping
ACPI SRAT Table
3.6.2 - Integrated Devices Sub-Menu
You can use this screen to select options for the Integrated Devices settings.
Use the up and down <Arrow> keys to select an item. Use the <Plus> and
<Minus> keys to change the value of the selected option.
Advanced
USB Control
USB BIOS Legacy Support:
MAC LAN Bridge:
MAC Address
SATA0 Controller
SATA1 Controller
Interrupt Mode:
NV RAID Configuration
Option
Auto
Limit
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
Discrete
Continuous
Disabled
Enabled
PhoenixBIOS Setup Utility
[Disabled]
[Disabled]
[Enabled]
XXXXXXXXXXXXX
[Enabled]
[Enabled]
[PIC]
44
http://www.tyan.com
Description
Select Memory Clock
frequency.
Interleave memory blocks
across Processor Nodes.
BIOS will auto detect
capability of memory
system.
Interleave memory blocks
across dram chip selects.
BIOS will auto detect
capability on each node.
Enable LMS mode only
when one CPU is installed
with 64G or more memory.
Configure MTRR mode.
Enable ACPI2.0 static
resources affinity table for
ccNUMA systems.
Item Specific Help