TYAN Thunder i860 S2603 User Manual page 49

Locate the 68-pin internal Ultra160 LVD SCSI cable (it should look similar to the one
1
Step
shown directly below).
Built-in terminator
Plug the long end of the cable(s) to the Ultra160 LVD SCSI connector(s) on the mother-
2
Step
board (either channel A or channel B). Note that the image(s) below may not be com-
pletely representative of your motherboard.
Plug the remaining connectors to the internal Ultra160 LVD SCSI peripherals.
3
Step
Terminator device
Internal Ultra160 SCSI peripherals come from the factory without termination. Proper
NOTE: termination is provided by the built-in terminator at the end of the Ultra160 internal
SCSI cable.
Thunder i860 S2603
Connect to Ultra160 LVD
peripherals
Connect to motherboard
Ultra160 LVD SCSI con-
nector
Channel A
Channel B
49