TRENDnet TEW-301PC User Manual page 18

TX Rate - Select the transmission rate on the network. 11Mbps is the default
setting.
Preamble - Select Long or Short Preamble. The Preamble defines the length of
the CRC block (Cyclic Redundancy Check is a common technique for detecting
data transmission errors) for communication between the Access Point and the
roaming wireless Network adapters. Long Preamble is the default setting.
Note: High network traffic areas should use the shorter preamble type.
Power Mode - Select from three modes:
Continuous Access Mode - this default setting consumes the most
power
Maximum Power Save-this setting consumes the least power
Power Save- this setting consumes a moderate amount of power
If any changes are made to the configuration of the wireless adapter, click Apply
to save the changes.
Configuration Utility - Security
Please note that all devices must share the same Security
(Encryption) settings to communicate on the network.
Data Encryption - enable Encryption by clicking on the box.
The TEW-301PC has Encryption disabled as the default setting.
Authorization mode - choose one of the following modes:
Open Authentication communicates the key across the network
Shared Authentication allows communication only with other
devices with identical WEP settings
Auto will automatically adjust to the Authentication mode of the
wireless client
Network Key - enter a key in either ASCII (e.g., a word) or hexadecimal
format
18
Fig. 6.5