TRENDnet TEW-301PC User Manual page 11

1
1
Install a wireless network adapter into a computer.
See the Quick Installation Guide included with the
product for installation instructions.
2 2
Install the TEW-301PC into a laptop computer.
See the Quick Installation Guide included with the
product.
3
3
Set the wireless configuration for the adapters to Ad-Hoc
mode, set the adapters to the same channel, same SSID
and assign an IP Address to each computer on the Ad-Hoc
network. (See Box below)
When assigning IP Addresses to the computers on the network, please
remember that the IP Address for each computer must be in the same
IP Address range as all the computers in the network, and the subnet
mask must be exactly the same for all the computers in the network.
For example:
192.168.0.2 with a Subnet Mask of 255.255.255.0, then the second
computer can be assigned an IP Address of 192.168.0.3 with a Subnet
Mask of 255.255.255.0, etc.
IMPORTANT: If computers or other devices are assigned the same IP
Address, one or more of the devices may not be visible on the
network
If the first computer is assigned an IP Address of
11