Canon MVX350i Instruction Manual page 96

Recording a Still Image on a Memory Card While
Recording Movies on a Tape
When you are recording a movie on a tape, you can record the same picture as a still
image on the memory card. Select the image quality from normal or fine.
CAMERA
MENU
CAMERA SETUP
( 37)
1. Open the menu and select [CAMERA SETUP]. Select [STILL I.REC], set
it to [ FINE] or [
2. While you are recording a movie, press the PHOTO button.
The size of the still image will be 640 x 480.
The quality of the still image is slightly lower than a still image recorded in
CARD CAMERA mode.
The still image cannot be recorded on a memory card when a fader, effect or
the multi-image screen is activated.
The still image cannot be recorded on a memory card when the widescreen
mode is selected.
"
to [OFF].
Recording from a Tape in the Camcorder
CAMERA
1. Play back the tape.
2. Press the PHOTO button halfway when the scene you wish to record
appears.
• The camcorder pauses playback. The remaining image capacity and other
information appear.
• When you press the PHOTO button on the wireless controller, recording starts
immediately.
3. Press the PHOTO button fully.
• The card access indicator flashes.
• You can also record a still image by pressing the PHOTO button fully when the tape
is in playback pause mode.
96
PLAY (VCR)
NORMAL] and close the menu.
" appears when you press the PHOTO button when [STILL I.REC] is set
PLAY (VCR)
CARD CAMERA
STILL I.REC••OFF
CARD CAMERA
CARD PLAY
CARD PLAY