Canon MVX350i Instruction Manual page 87

5. Press the AUDIO DUB. button on the wireless
controller.
"AUDIO DUB." and "
6. Press the PAUSE
to begin dubbing.
•
• Microphone: Speak into the microphone.
7. Press the STOP
to stop dubbing.
Use only tapes recorded in SP mode 12-bit audio sound with this camcorder.
Audio dubbing will stop if the tape has a blank section or a section recorded in
LP mode or 16-bit mode.
devices to the MIC terminal.
You cannot use the DV terminal for audio dubbing.
If you add sound to a tape not recorded with this camcorder, sound quality may
decrease.
Sound quality may decrease when you add sound to the same scene for more
than 3 times.
You can check the picture on the LCD screen.
built-in speaker or audio device.
When you use a microphone, you can check the picture on a TV connected via
the AV terminal and the sound via headphones connected to the TV.
Set the zero set memory at the end of the scene you wish to dub audio. The
camcorder will automatically stop audio dubbing at that point.
" appear.
button on the wireless controller
Audio device: Begin playback.
button on the wireless controller
Audio device: Stop playback.
When using the built-in microphone, do not connect any
When you connect an audio device, check the sound via
PAUSE SLOW
ZERO SET
AUDIO DUB. MEMORY TV SCREEN
E
PLAY
STOP
PAUSE
SLOW
ZERO SET
AUDIO DUB. TV SCREEN
MEMORY
PLAY
STOP
PAUSE SLOW
ZERO SET
AUDIO DUB. MEMORY TV SCREEN
87