Canon MVX350i Instruction Manual page 143

Message
PRINT ERROR
HARDWARE ERROR
RECHARGE THE
PRINTER BATTERY
COMMUNICATION
ERROR
CHECK PRINT
SETTINGS
PRINTER IN USE
PRINTER WARMING UP
PAPER LEVER ERROR
PRINTER COVER OPEN
NO PRINTHEAD
Cancel printing, disconnect the USB cable and turn off the printer. After a
while, turn the printer back on and reconnect the USB cable. Check the
printer status. If the error persists, consult your dealer or a Canon
Service Center listed in the Contact List provided with the printer or the
printer manual.
When you are printing using the
Cancel printing. Turn off the printer and turn it back on. Check the printer
status. If the printer is equipped with a battery, it might be exhausted. In
such case, turn off the printer, replace the battery and turn it back on. If
the error persists, consult your dealer or a Canon Service Center listed in
the Contact List provided with the printer or the printer manual.
The printer battery is depleted.
The printer is experiencing a data transmission error. Cancel printing,
disconnect the USB cable and turn off the printer. After a while, turn the
printer back on and reconnect the USB cable. When you are printing
using the button, check the print settings.
Or, you attempted to print from a memory card that contains a large
number of images. Reduce the number of images.
The print setting cannot be used for printing with the
The printer is in use. Check the printer status.
Printer is warming up. If the message does not disappear after a few
seconds, check the printer status.
Paper lever error occurred. Adjust the paper selection lever to the proper
position.
Close the printer cover securely.
No print head is installed in the printer or print head is defect. Refer to the
instruction manual of your printer.
Explanation
button, check the print settings.
E
button.
143