Canon MVX350i Instruction Manual page 122

Cancel Printing
Press the SET dial during printing. A confirmation dialog appears. Select [OK]
and press the SET dial.
- Canon Printer: Printing stops even if it is incomplete and the paper is fed
through.
- Canon CP-Printer CP-10/CP-100: A print in progress cannot be stopped.
Printing stops when the current print is finished, and the remaining prints are
canceled.
Printing Errors
If an error occurs during the printing process, an error message appears (
142).
- Canon Printer: Resolve the error. When printing does not resume
automatically, select [CONTINUE] and press the SET dial. If [CONTINUE]
cannot be selected, select [STOP], press the SET dial and retry printing.
Refer also to the printer manual for details.
- Canon CP-Printer CP-10/CP-100: Select [STOP] or [RESUME] and press the
SET dial. (The [RESUME] setting may not appear with some error messages.
In that case, select [STOP].) Refer also to the printer manual for details.
- If the error still persists and printing does not restart, follow below procedure:
1. Disconnect the cable.
2. Turn the POWER switch of the camcorder to OFF and back to PLAY (VCR).
3. Reconnect the cable.
When you have finished printing:
1. Disconnect the cable from the camcorder and printer.
2. Turn off the camcorder.
122