Canon MVX350i Instruction Manual page 153

Memory Card Operation
Problem
Memory card cannot be
inserted.
Memory card cannot be
recorded.
Memory card cannot be
played back.
Image cannot be erased.
" " flashes red.
Printing
Problem
The printer is not operating
even though camcorder and
printer are correctly
connected.
Cause
Memory card was not facing
the correct direction.
Memory card is full.
Memory card is not formatted. Format the memory card.
Memory card is not inserted.
File number reached
maximum value.
SD Memory Card is
protected.
Camcorder is not set to
CARD PLAY mode.
Memory card is not inserted.
Image is protected.
SD memory card is protected. Change the position of the
Card error occurred.
Cause
The camcorder is set to
NETWORK mode.
Solution
Turn the memory card over
and reinsert it.
Replace the memory card or
erase images.
Insert a memory card.
Set [FILE NOS.] to [RESET]
in the menu and insert a new
memory card.
Change the position of the
protect switch.
Set the camcorder to CARD
PLAY mode.
Insert a memory card.
Cancel the protection.
protect switch.
Turn off the camcorder.
Remove and reinsert the
memory card. Format the
memory card if flashing
persists.
Solution
1. Set the camcorder to
CARD PLAY mode.
2. Disconnect and reconnect
the USB cable.
3. Turn off the printer and turn
it back on.
90
E
90
117
90
93
90
109
90
111
90
117
–
153