Canon Mk2500 User Manual page 53

4
When you use Mk2500, select [Mk2500].
When you use Mk2100, select [Mk2100].
[Select printer]
[The setting of the device type]
[Automatic acquisition]
A printer acquires information in the case of a communication wait
state and distinguish it automatically.
[Mk2500 (Terminal I.D. printing area adjustment function)]
Set it in Mk2500.
[Mk2100 (No Terminal I.D. printing area adjustment function)]
Set it in Mk2100.
Use the same printer which is selected in [Select printer] setting. If the setting is different, it will
not work correctly.
5
You can change setting when you click [OK].
In case the setting is changed while data is being edited, a message appears to
ask whether to save the data or not.
To use the printer after sending data, you need to cancel the standby state (ready
for data reception) of the printer. Make sure that the printer is not receiving data,
and then press the [Cancel] key. When the character input display appears, you
can operate the printer.
Display the installed printer driver for a Cable I.D. printer.
Set printer driver to use.
47
Operating Mk2500PC