Canon Mk2500 User Manual page 39

[Set Length]: Selects the length of tube to be cut.
With [Specify] selected, you can specify a length from 2-
150mm.(input value 200-15000)
Select this to calculate the character string length from the
character size, character space, frame and lines and fit the
character string within the set length.
The default at installation is [Automatic].
The decimal part of the specified value is automatically
adjusted in units of 0.25 mm according to the
specifications of the printer. To confirm the set length after
the adjustment, click [OK] in step 3 to close the Change
Format dialog and see the value in [Set Length] on the
main screen.
When set length is set to a value less than 8.5 mm, the
specifications for printing depend on the media type. Refer
to
[Terminal I.D.
Select the Terminal I.D. printing area.
printing area]
Select from Normal or Expansion.
The default at installation is [Normal].
If you select [Expansion], the printing media shall become
only the Terminal I.D.
Selects way in which characters are aligned.
[Alignment]:
Select either Centered, Left 2mm, Left 3mm, Left 4mm or
Left 5mm.
The default at installation is [Centered].
If you select [Automatic] for [Set length], you cannot select
a character alignment.
When set length is set to a value less than 8.5 mm, the
specifications for printing depend on the media type. Refer
to
[All line centering] Select a way in which characters are aligned of 2 Lines or 3
Lines.
Select from On or Off.
The default at installation is [Off].
If you select [Automatic] for [Set length], you cannot select
[All line centering].
If you select [Lines] is1 Line, you cannot select [All line
centering].
If you select [Orientation] if [Vert/Hor char], you cannot
select [All line centering].
[Character Size]: Selects the size of the characters.
Select either 1.3mm Norm,2mm Half, 2mm Norm, 3mm Half,
3mm Norm, 6mm Half or 6mm Norm.
The default at installation is [3mm Norm].
[Character Space]: Selects the space between characters.
Select from Narrow, Medium, or Wide.
The default at installation is [Narrow].
"Printing with [Specify] Specified for Set Length"
"Printing with [Specify] Specified for Set Length"
33
Operating Mk2500PC
(P.35).
(P.35).